Uppgraderingskit V3 Ultralight Enduro Trail Stödställning

€17,99EUR
Skatt inkluderad. Frakt beräknas vid kassan.
×
Uppgraderingskit V3 Ultralight Enduro Trail Stödställning

We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.


Uppgraderingskit V3 Ultralight Enduro Trail Stödställning

Välj variant
Ange namn
Ogiltig e-postadress
Obligatoriskt mobilnummer Ogiltigt nummer Ogiltig landskod För kort För länge ✓Giltig
Endast vanlig text är inte tillåten i meddelandet Meddelandelängden måste vara 250 tecken
Land är obligatoriskt
Ditt meddelande har registrerats. Stäng
Det verkar som att du redan har aktiva aviseringar för den här storleken!

Vi respekterar din integritet och delar inte din e-post med någon.

×

Vi har avbrutit din begäran.

I lager

VARNING: detta är ett uppgraderingsset för 1:a generationens Trail Jack. Detta är inte den kompletta Trail Jack. Så det inkluderar inte rören och fotfästet.

Om du äger de äldre versionerna av Ultralight Enduro Trail Jack Stand kan du använda detta kit för att uppgradera till den lättare version 3. Alla delar är kompatibla. Med detta kit minskar du vikten ännu mer till 123,5 gram (4,3 oz), cirka 17 gram mindre än de tidigare versionerna.

Genom att minska hela 17 gram från sin föregångare väger Trail Jack Stand 3.0 nu endast 123 gram. Detta är den lättaste Trail Jack Stand på marknaden. Tack vare den geniala omdesignen av y-hållaren (gaffeln), foten på trail jack och en slankare rostfri R-klämma har vi uppnått en design som är ännu lättare och mer packbar. Det bästa? Alla dessa förändringar sker utan att offra en uns funktionalitet eller styrka.

Tillverkad med precision av 6061 T6-aluminium med CNC-bearbetning, behåller denna uppdaterade version sin krona som den lättaste pallbocken. Dess enkelhet att montera och demontera är oöverträffad, och du behöver inte oroa dig för en permanent fotfäste – vilket säkerställer att din utrustning förblir minimal och strömlinjeformad, vilket gör den lätt att packa.

Smidigare, lättare och redo för äventyr

Dess smarta design gör att foten packas platt i din verktygsrulle. Och även om den är lättare är den fortfarande stark, kapabel att stödja även de tyngsta äventyrsmotorcyklarna som väger upp till 240 kilo.

Ansvarsfriskrivning: Observera att den blå anodiserade färgen på enskilda delar kan variera något.


Ta inte bara vårt ord för det! Kolla in recensionerna nedan från nöjda kunder som delat sina erfarenheter med Trail Jack Stand:

  • Läs en detaljerad artikel av @rtwpaul på Adventure Rider om Trail Jack och Asahi Lightools.
  • Läs en utmärkt PDF-recension i det österrikiska Motorradmagazin 
  • Titta på Thomas Hansens video från Norge med Trail Jack Stand.
  • Njut av en spansk video av Carles Domènech på CDOM Motovlog.
  • Titta på aussien Joshs video från MVDBR Enduro som visar Trail Jack och Asahi Lightools.
  • Titta på denna videorecension av italienaren Gianluca - aka Bibo, som använde Trail Jack nästan dagligen under sin 20 000 km långa resa genom Afrika.

Upptäck bekvämligheten och pålitligheten hos Ultralight Enduro Trail Jack Stand och andra Rolling Mavericks' verktyg som kommer att lyfta dina motorcykeläventyr till nya höjder.

Instructional video:

Trail Jack Stand YouTube instructional video
The above video and the manual below were made with older generation Trail Jacks. The principle of safely lifting a wheel off the ground remains identical. New videos will be listed soon

Manual (PDF)

The Story
Trail jacks have been a longstanding tool in the world of adventure riding. However, the Rolling Mavericks' UltraLight Enduro Trail Jack Stand takes the concept to a whole new level, representing my vision of a trail jack. As an avid rider who has relied on a homemade version for years, I never embark on a trail adventure without it. 

This simple yet indispensable emergency tool is a game-changer when encountering a flat tire on the trail. It eliminates the need to search for rocks or sticks to lift your bike and becomes a must-have companion when riding in terrain devoid of trees or rocks.

Use
Using trail jacks is a breeze. To lift the rear wheel off the ground, start by securing the front brake with a Velcro strap wrapped around the brake lever and throttle. For a front-wheel lift, engage first gear to prevent the rear wheel from rolling. Adjust the tubes to the desired height to raise one wheel by sliding the buttonclip into the desired hole.

To elevate one of the wheels, simply push the bike with one hand, leaning it further onto the side stand on the opposite side. This action lifts one wheel off the ground, allowing you to position the trail jack under the swingarm or bash plate, depending on which wheel needs lifting.

The Good, the Bad, and the Ugly
Trail jacks are undeniably valuable tools, and I always carry one when going on moto camping trips. However, I've had two minor gripes with traditional trail jacks. Firstly, their weight. Most trail stands weigh anywhere from 150 to 450 grams, and when you're riding Enduro or embarking on long adventures with your fully loaded bike, every gram matters.

Secondly, the foot or yokes of trail jacks tends to be bulky. When permanently attached to the jack, they often become too long, thick, and wide, making it challenging to fit them into standard tool rolls.

The Rolling Mavericks' UltraLight Enduro Trail Jack Stand addresses these issues by offering an ultralight and compact design. The entire kit, including the buttonclip and front brake Velcro strap lock, weighs a mere 98 grams and does not require any assembly.

The outer tube, at 18 mm and the TPU foot with a diameter of 23,5 is the thickest part. The Rolling Mavericks' UltraLight Enduro Trail Jack Stand fits snugly next to my Motion Pro T6 tire levers inside my tool roll, occupying minimal space without adding significant weight.



Trail Jack Stand lifting BMW R80 flat tyre

It's All in the Details!
When it comes to the finer points, the UltraLight Enduro Trail Jack Stand truly excels! Usually, the Velcro strap used for locking up the front brake when lifting the rear wheel is wide and thick, resulting in a bulky packing experience. Moreover, it often features one-sided Velcro, making it a fiddly task to install. However, with the UltraLight Enduro Trail Jack Stand, we've taken a different approach. It utilizes a thin and narrow, 12 mm double-sided Velcro strap, eliminating the need for fumbling and ensuring a hassle-free brake lock.

Rest assured, the UltraLight Enduro Trail Jack Stand includes everything you need to make full use of this tool, including a stainless steel spring clip and spare o-rings.

Other Uses
Interestingly, I recently discovered an additional emergency use for the trail stand while packing my bike and accidentally tripping over my tent. As luck would have it, one of the tent poles broke, and to my surprise, the thinnest tube of the trail stand turned out to be the perfect temporary fix. I'm always eager to hear about other creative applications for the trail stand.

We'd love to hear how this tool, or any other tools, saved your day. Feel free to share your story with us at info@rollingmavericks.com.

Sounds intriguing, doesn't it? However, if you're still not convinced, if doubts linger about its ability to securely hold your bike off the ground, rest assured that you're not alone in wondering. 

It's a question I'm frequently asked. But instead of simply telling you that it can, I believe in showing you the evidence. After all, seeing is believing :-)

Video about Rolling Mavericks Ultralight Trail Jack Stand weight capacity
Material
7075 T6 anodized aluminium
Foot material TPU
Min. Height
250 mm
Max.Height
435 mm
Weight
98 gr ± 1 gr. (3,46 oz.)
Pack Length
250 mm
Large Tube dia.
17 mm
Small Tube dia.
13,4 mm
Foot diameter 23,5 mm
Step-height Adjustments
22,5 mm in 9 increments
Buttonclip 5mm stainless
Required hole size Yoke
13 mm (5/8) or larger

Höja ett hjul

Se hur lite ansträngning det krävs för att lyfta fram- eller bakhjulet från marken.
×
Uppgraderingskit V3 Ultralight Enduro Trail Stödställning

We often restock popular items or they may be returned by the other customers. If you would like to be notified when this happens just enter your details below.


Välj variant
Ange namn
Ogiltig e-postadress
Obligatoriskt mobilnummer Ogiltigt nummer Ogiltig landskod För kort För länge ✓Giltig
Endast vanlig text är inte tillåten i meddelandet Meddelandelängden måste vara 250 tecken
Land är obligatoriskt
Ditt meddelande har registrerats. Stäng
Det verkar som att du redan har aktiva aviseringar för den här storleken!

Vi respekterar din integritet och delar inte din e-post med någon.

×

Thank you, we have now received and recorded your request to be notified should Uppgraderingskit V3 Ultralight Enduro Trail Stödställning be restocked.

We will only use your email for this purpose.

Vi har avbrutit din begäran.