This oil drain tool makes an oil change on your KTM, Husky, or GasGas easier and less messy without spilling oil all over your frame, skidplate, and onto your workshop floor.
Warning: Do not install ODT permanently and run the engine with the Oil Drain Tool installed. Always remove the ODT after an oil change and install the OEM drain plug.
This oil drain tool kit (ODT) is handy in the workshop or garage, and it is also a must-have to take with you on your longer motorcycle travels where you know you need to change the oil while on the road. Changing oil is easier and faster because there's no need to take the skid plate off, but its most significant benefit is a lot less messy oil exchange. The ODT prevents oil from getting all over your motorcycle and the floor. And the ODT kit only takes up a little space in your luggage.
Video:
The kit includes an oil drain tool, 0-ring, hose, hose bung & zip ties.
Oil drain tool eliminates oil mess, making the oil change process much cleaner
Faster fluid changes, no need to remove the skidplate, save your time during routine maintenance
O-Ring prevents leaks and is resistant to oil and heat
Zip tie secures the hose to the ODT body
Easy to Install
Thread M12 x 1,5mm
Short orange or blue oil drain fits:
KTM
125-530 SX/SX-F/EXC/EXC-F/XC/XC-F/XC-W/TPI/SIX DAYS 1998-2023
Husqvarna
125-501TE/FE/TC/FC/TX/FX 2014-2023
Husaberg
125-501 FE/FX/TE 2009-2014
GasGas
125-300 EX/EC/MC 2021-2023
250-450 EX F/EC F/MC F 2021-2023
Long orange or black oil drain fits
Ensure your oil drain is in the same plane as the gear shifter! On EXC-F 250, for example, it will not fit.
KTM
EXC EXC-F 450 - 500 (** DOES NOT FIT THE 250 or 350 **)
EXC EXC-TPI 250 - 300
Husqvarna
2010 -2020 FE - 250 - 450 - 501 (** DOES NOT FIT THE 250, 350 **)
TE - TE-TPI 250 - 300
GasGas
EX/EC/MC 125-300 2021 2022 (** DOES NOT FIT THE 250, 350 **)
How to use:
1. Lean your bike over, resting the handlebars against a work stand.
2. Remove the oil drain bolt in the transmission.
3. Screw in the oil drain tool, attach the ODT hose with a plug fitted.
4. Stand the bike up over an oil drain pan.
5. Drain the oil by removing the ODT hose bung.
6. Once all of the oil is drained, remove the Oil Drain Tool and replace it with the OEM drain plug.
stabil und leicht! Ich verwende ihn mittlerweile nicht nur auf den Touren, sondern zusammen mit dem Enduro Trail Jack Stand 3.0 auch bei mir in der Werkstatt!
T6 Combo Tyre Lever Wrench
TwoWheeledExplorers
Excellent solution
I came close to tapping a hose into the tank just to have a vent that is not pinched under my tank bag. I'm really happy to find this product as it's a great solution to the problem.
Fuel Tank Side vent
Mike D.
Perfect tool
Perfect working and beautiful detailed tool. Ultra light and easy in use. Also it comes with a very clear manual.
Rolling Mavericks Ultralight Enduro Trail Jack Stand 3.0
Rob Emmen
Uitstekend
Snelle levering en van prima kwaliteit.
Rolling Mavericks Ultralight Enduro Trail Jack Stand 3.0
Ullr
Perfect! KTM 690 ENDURO
No need for a lift.
Rolling Mavericks Ultralight Enduro Trail Jack Stand 3.0
Great place to get all your lightweight tools, small carry bags, and of course the Ultralight Enduro Trail stand. Dropped over a half a kilo from my tool kit! Super fast shipping to the US.
What to say but ,customer service is top notch,
Produckt top notch
David is honest and easy to deal with
Yes I will shape again at his store
Thank You David
